A heavy-duty 2,200 lb table lift that brings motorcycles, ATVs, quads, side-by-sides and snowmobiles up to a comfortable working height on smooth 110V hydraulics.
The Performance Hoist Motorcycle/ATV Lift is a heavy-duty hydraulic table lift built for motorcycles, ATVs, quads, side-by-sides and snowmobiles. Roll the bike up the ramps, lock the front wheel in the chock, and raise it to a 48" working height. Slide in the two 15" extensions and the same deck takes a quad or side-by-side. Chain, tires, oil, detailing: all of it without kneeling on the garage floor.
$0-down lease-to-own financing available — see options. Sold, set up, and serviced by SVI across Vancouver Island.
This is a heavy-duty powersports lift, not a lightweight bike jack. With 2,200 lbs of capacity it handles everything from a sport bike to a big touring motorcycle, and it's just as much at home under an ATV, quad, side-by-side or snowmobile. It's a fit for the home garage where the bikes live, and for the powersports shop that services them all season.
The platform is built in three sections. The main deck is 30" wide, right for a motorcycle, and two 15" slide-in extensions bring it out to a full 60" for four-wheelers. Each extension rides on four pipe slides, so there's no deflection with the wings in. Front and rear drop-out panels let you pull either wheel without taking the machine off the lift, and the front wheel chock sits on a panel that extends even further for extra-long motorcycles.
Lifting is done by a heavy-duty hydraulic cylinder on standard 110V power, so the rise is smooth and steady rather than jerky, and built-in safety locks hold the deck at height. The control box is magnetic: stick it out of the way, grab it when you need it. The whole lift rolls in any direction on its built-in castor kit, and the wide base keeps it planted while you work. It comes with a motorcycle lifting jack, three drive-on approach ramps, and tie-down hooks with straps, so it's ready to work the day it arrives.
| Model | Performance Hoist Motorcycle/ATV/Snowmobile Lift |
| Lifting Capacity | 2,200 lbs |
| Type | Hydraulic table lift, drive-on |
| Lifting Height | 48" in the top position |
| Platform Width | 30" main deck, 60" with both 15" extensions |
| Platform Length | 87" (front chock panel extends further for extra-long motorcycles) |
| Drop-Outs | Front and rear, for wheel removal |
| Power | 110V |
| Mobility | Built-in wheel castor kit, wide stable base |
| Best For | Motorcycles, ATVs, quads, side-by-sides, snowmobiles |
Every Performance Hoist Motorcycle/ATV Lift from SVI Automotive Equipment ships complete and ready to work.
Not sure whether the chock or the vise suits your bikes? Call or text Bruce and he'll walk you through it.
8,000 lb four-post parking lift for home garages. Stack two cars in one bay on 110V power.
View Lift
7,000 lb portable mid-rise that rolls into place and lifts to working height. No permanent install.
View Lift
8,000 lb four-post storage and service lift for homeowners and restoration shops.
View LiftCall us or send a message. We'll help you choose between the chock and the vise and get the lift to your garage or shop.
